Net research NetProbe 2000 - Throughput Tab; LATENCY Tab

199
THROUGHput Tab
• Max Rate - Defines the rate so that the throughput test should begin with, in
terms of a percentage of line rate or in Mbps.
• Accuracy – Defines how precise the result must be. The accuracy is based on
line rate (% or Mbps).
• Test duration – Defines the duration (sec) to run each iterative test.
• Thresholds - Defines the threshold value in percentage of line rate or Mbps. If
determined throughput value for specific frame size is lower than the
threshold value, the test is declared as FAIL.
LATENCY Tab
• Maximum Rate – Defines latency test transmission rate in terms of a
percentage of line rate or Mbps. Select Copy from throughput box to use
throughput test result as desired transmission rate for latency test.
• Repetitions – Defines the number of time to run each iteration before taking
the average.
• Test duration – Defines the duration (sec) to run each iterative test.
• Latency Thresholds – Defines the maximum acceptable average latency (usec)
required for a test to pass.
• Jitter Threshold – Defines the maximum acceptable variability (usec) of
interpacket arrival required for a test to pass.