235
SAC Tab
The Service Acceptance Criteria (SAC) parameters define the pass/fail verdict thresholds for service. The set of values
defines minimum requirements to ensure that the service meets witch Service Level Agreement. SAC parameters are
only guaranteed for traffic conforming to the CIR.
The following values comprise the Service Acceptance Criteria:
• Max FTD (Frame Transfer Delay): Determines the maximum delay that the
frames can take to travel from source to destination (round trip delay for looped
back frames) to still be compliant with the SLA.
• Max FD (Frame Delay Variation): Defines the maximum frame jitter allowed to
still be compliant with the SLA.
• Max Frame Loss: Defines the maximum ratio of lost frames to total transmited
frames allowed to still be compilant with the SLA.
• Min Availability: Defines the minimum percentage of service availability allowed
to still be compilant with SLA.
Enabling or disabling checkbox determines if coresponding parameter will be verified durring a test.
To Next Page
Loading...