176
12.6 Bit Error Testing (BERT)
This option supports bit error testing (BERT) over Ethernet Layer 1 Framed, Layer 2, Layer 3 and Layer 4. Test can be
performed with fixed, pseudo random or user defined patterns.
12.6.1 Setup
The main BERT screen is divided between Setup and Results with a tab for each. When you first enter the BERT
application, the Setup tab is active. From this Setup you can save a BERT profile, configure general parameters, configure
test traffic and enable error injection.
GENERAL menu
Use the General menu to configure the Test Type and Pattern.
To Next Page
Loading...