222
Traffic shaping types:
• Constant: The network traffic is generated in constant mode and the bandwidth of
the traffic generation can be set based on specified Tx Rate.
• Burst: The network traffic is generated in burst mode. The burst Period and Duty
Cycle are configurable. Period determines the burst pattern duration. Duty
parameter determines the burst duration within the burst period. The Tx Rate
parameter represents burst transmission rate.
• Ramp: The network traffic can be generated in ramp mode. Ramp transfers the
frames by incrementing successively the transmit rate up to the Tx Rate. Duration of
ramp is defined by Period parameter.
To Next Page
Loading...