240
The service configuration test is broken down into three steps. The steps are tested individually for all services and
evaluated as follows:
• CIR Test: The CIR test step is considered to pass if the computed performance metrics (FTD, FDV, FLR) are within
acceptable limits.
• EIR Test
o Non-color-aware services: The test is considered to pass if CIR*(1-FLR)<Rx ULR<= CIR+EIR.
o Color-aware services: The test is passed if FTD, FDV and FLR for green traffic are within acceptable limits.
• Traffic Policing Test
o Non-color-aware services: The test is considered to pass if CIR*(1-FLR)<Rx ULR<= CIR+EIR + 1%.
o Color-aware services: The test is passed if FTD, FDV and FLR for green traffic are within acceptable limits
and if the aggregated Rx ULR (green + yellow) meets following condition: CIR*(1-FLR)<Rx ULR<= CIR+EIR
+ 1%.
To Next Page
Loading...