NetComm NL1901ACV - SIP Extra Settings

NL1901ACV Enhanced Hybrid 4G LTE Gateway – User Guide
102 of 146
UG01063 v. 1.0 December 2018
© NetComm Wireless 2018
Dial plan example: Australia Dial Plan
000|[*#]X[0-9*]|*#X[0-9*]|00[1-
9]XX.t|014XXXXXXX|016XXXXXX|0192X|0198XXXXXX|0[23478]XXXXXXXX|0500XXXXXX|11XX|123X|124XX|1251XX|1252
XXX|1255X|1258XXX|1271X|130XXXXXXX|13[1-9]XXX|1802XXX|189XX|1[8-9]XXXXXXXX|[2-9]XXXXXXX
000 = Australia Emergency Call Service
0011*t = International number (After 0011 the gateway allows entry of arbitrary digits then and dials out after 4
seconds from the entry of the last digit.)(Note: Please ensure your VoIP provider supports international numbers for
the country you are dialling.)
0[23478]XXXXXXXX = Landline numbers with area code 02,03,04,07,08 +XXXX XXXX and Mobile numbers with
04XXXXXXXX)
1[8-9]XXXXXXXX = 1800 and 1900 free call numbers
130XXXXXXX = 1300 business numbers
13[1-9]XXX = 13 business numbers
[2-9]XXXXXXX = Landline numbers without area code
SIP Extra Setting
This page displays additional settings related to the SIP service.
Figure 114 – SIP Extra Setting page
PARAMETER
DEFINITION
Dial tone time
Set the Dial tone duration.
Busy tone time
Set the Busy tone duration.
Inter digit time
Set the timing between digits. The valid range is 1 ~ 5.
Off hook warning tone time
Set the Off-hook warning tone duration.
Ringback tone time
Set the Ring back tone duration.
Table 41 – SIP Extra Settings table