NL1901ACV Enhanced Hybrid 4G LTE Gateway – User Guide
UG01063 v. 1.0 December 2018
Figure 56 – NAT -- Port Trigger Configuration page
or
A user can select a pre-configured application from the list or select
the
option to create custom application settings.
Enter the starting trigger port number (when you select
). When an application is selected the port range values
are automatically entered.
Enter the ending trigger port number (when you select
). When an application is selected the port range values
are automatically entered.
Options include:
,
or
Enter the starting open port number (when you select
). When an application is selected the port range values
are automatically entered.
Enter the ending open port number (when you select
). When an application is selected the port range values
are automatically entered.
Options include:
,
or
Table 22 – NAT -- Port Trigger Configuration settings
DMZ Host
The NL1901ACV will forward IP packets from the Wide Area Network (WAN) that do not belong to any of the
applications configured in the Virtual Servers table or being used in the Virtual Server table to the DMZ host.
Enter the
Host’s IP address and click Apply to activate the DMZ host. To deactivate the DMZ Host function, clear
the IP address field and press the
Save/Apply button.
To Next Page
Loading...
