NetComm NL1901ACV - High Priority QoS Classification

NL1901ACV Enhanced Hybrid 4G LTE Gateway – User Guide
132 of 146
UG01063 v. 1.0 December 2018
© NetComm Wireless 2018
Figure 145 – QoS – Queue Configuration 2
3 Enter a Name of 15 characters or less to reflect the device that will have low priority QoS e.g.
PC2LowPriority.
4 Set the Enable option to Enable.
5 Set the
Interface (Australian customers use atm0(0_8_35), NZ customers use atm0(0)0)100)).
6 Enter a
Queue Precedence. The higher the value, the lower the priority. For the lowest priority, set it to
8(WRR).
7 Set the
DSL Latency as Path0.
8 Click the
Save/Apply button.
High Priority QoS Classification
1 Select Advanced Setup > Quality of Service > QoS Classification.
Figure 146 – QoS Classification configuration
2 Click the Add button.