NL1901ACV Enhanced Hybrid 4G LTE Gateway – User Guide
UG01063 v. 1.0 December 2018
To add a static route rule click the Add button. The following screen is displayed.
Figure 79 – Routing – Static Route configuration
Select the IP Version, enter the Destination Network Address, select an Interface, and enter the Gateway IP
Address.
Optionally enter a number in the
Metric field to set a priority for this route, the lower the number the higher the
priority.
Then click
Apply/Save to add the entry to the routing table.
Policy Routing
This function allows you to add policy rules to certain situations.
Figure 80 – Routing – Policy Routing list
Click the Add button to add a policy rule. The following screen is displayed.
Figure 81 – Advanced – Routing – Policy Route configuration
To Next Page
Loading...
