NL1901ACV Enhanced Hybrid 4G LTE Gateway – User Guide
UG01063 v. 1.0 December 2018
c Select the WAN mode for your internet connection as specified by your Internet Service Provider (ISP).
Figure 16 – Select WAN mode for Ethernet WAN connection
d Click the Next button.
PPP over Ethernet (PPPoE)
If at step c you selected PPP over Ethernet (PPPoE):
i Select the correct VLAN option for your connection.
For
New Zealand customers, the requirement for VDSL is VLAN tag 10.
If you are not sure of the tagging requirement for your connection, please contact your ISP.
Figure 17 – Select VLAN option for PPPoE
ii Click the Next button.
iii Enter the User ID and Password assigned to you by your Internet Service Provider (ISP)
iv If you want to set up the optional
Mobile Broadband fallback facility, select Enable Mobile
Broadband Backup and enter the following mobile network’s details: Network Name (APN) and
the
Username and Password, if required. For more information on setting up fallback protection
and unlocking the SIM, refer to the
Mobile Network section on page 30.
Figure 18 – Ethernet WAN connection – Enter User ID and Password
v Click Finish to view the setup Summary.
To Next Page
Loading...
