NL1901ACV Enhanced Hybrid 4G LTE Gateway – User Guide
UG01063 v. 1.0 December 2018
5 Now the first party takes over the call and he is in connection with the third party.
Consultative Transfer
Consultative transfer lets the third party answer the transferred call, and then hook on the transferring party. It is
more gentle than call transfer. Check with your VoIP Provider if your service supports Consultative Transfer.
1 Assume you have already been in a voice connection with a first party.
2 Press
FLASH to hold the first party.
3 Dial
#91 + third party number.
4 After the third party answering the call, hook on your phone.
5 Now the first party takes over the call and he is in connection with the third party.
Call Forwarding No Answer
If this feature enabled, incoming calls are forwarded to third party when you does answer them. It involves in two
steps: setting the forwarding number and enable the feature. Check with your VoIP Provider if your service
supports Call Forwarding.
1 Enable Forward on "no answer" in the
Voice--SIP Advanced Setting page.
2 When our phone does not answer the incoming call, the call is forwarded.
Call Forwarding Busy
If this feature enabled, incoming calls will be forwarded to third party when you busy. It involves two steps: setting
the forwarding number and enable the feature. Check with your VoIP Provider if your service supports Call
Forwarding
1 Enter a
Busy Call forwarding number and enable Forward on "busy" in the Voice--SIP Advanced Setting
page.
2 When our phone is busy, this call can be forwarded.
Call Forwarding All
If this feature enabled, incoming calls are forwarded to third party without any reason. It involves in two steps:
setting the forwarding number and enable the feature. Check with your VoIP Provider if your service supports Call
Forwarding
1 Enter an
Unconditionally Call forwarding number and enable Forward Unconditionally in the Voice--SIP
Advanced Setting page.
2 All incoming calls are forwarded to the third party.
Three-Way Conference
Three-way conference enables you to invite a third party to a call, and every person in the conference is able to
hear others’ voice. Check with your VoIP Provider if your service supports Conference call.
1 Assume you are in connection with a first party.
2 Press
FLASH to put the first party on-hold.
3 Dial a third party.
4 After the third party answers the call, press
FLASH again to invite the first party.
To Next Page
Loading...
