NL1901ACV Enhanced Hybrid 4G LTE Gateway – User Guide
UG01063 v. 1.0 December 2018
Limiting the downstream rate
1 Navigate to the QoS Queue Configuration page to add a queue for the LAN interface, for example:
Figure 152 – QoS Queue Configuration
1 On the QoS Classification page, add a rule to limit the downstream rate, for example:
Classification Criteria:
Class Interface: the appropriate WAN interface
Classification Results:
Class Queue: the queue that was created on Step 1
Set rate-limit: set according to your preference
Figure 153 – Network Traffic class Rule
2 Click Apply/ Save
To Next Page
Loading...
