NetComm NL1901ACV - Figure 19 - IP over Ethernet (Ipoe) - VLAN Setup; Figure 20 - IP over Ethernet (Ipoe) - Static or Auto IP Address

NL1901ACV Enhanced Hybrid 4G LTE Gateway – User Guide
29 of 146
UG01063 v. 1.0 December 2018
© NetComm Wireless 2018
IP over Ethernet (IPoE)
If at step c you selected IP over Ethernet (IPoE):
i Select the correct VLAN option for your connection. For
New Zealand customers, the
requirement for VDSL is
VLAN tag 10. If you are not sure of the tagging requirement for your
connection, please contact your ISP. Click the
Next button.
Figure 19 – IP over Ethernet (IPoE) -- VLAN Setup
ii If your ISP has supplied a static IP address, select Use the following Static IP address and enter
the details, otherwise select
Obtain an IP address automatically.
Figure 20 – IP over Ethernet (IPoE) – Static or Auto IP Address
iii If you want to set up the optional Mobile Broadband fallback facility, select  Enable Mobile
Broadband Backup and enter the following mobile network’s details: Network Name (APN) and
the
Username and Password, if required. For more information on setting up fallback protection
and unlocking the SIM, refer to the
Mobile Network section on page 30.
iv Click the
Next button to display details of the settings in a Summary page.
v Click
Apply/Save to activate the NL1901ACV’s connection to the internet.