NL1901ACV Enhanced Hybrid 4G LTE Gateway – User Guide
UG01063 v. 1.0 December 2018
Interface Grouping
Port Mapping allows you to create groups composed of the various interfaces available in your gateway. These
groups then act as separate networks.
Figure 95 – Interface Grouping list
Click Add to create an Interface group, see next section.
To delete an Interface group entry, click the checkbox next to the selected group entry and click the
Remove
button.
Figure 96 – Interface Grouping configuration
Enter a group name and then use the arrow buttons to select which interfaces you wish to group.
Click
Apply/Save to save the Interface grouping configuration settings.
To Next Page
Loading...
