NL1901ACV Enhanced Hybrid 4G LTE Gateway – User Guide
UG01063 v. 1.0 December 2018
Wireless – Security
The NL1901ACV supports all encryptions within the 802.11 standard. The factory default is WPA2-PSK. The
NL1901ACV also supports:
WPA, WPA-PSK, WPA2 or WPA2-PSK
You can also select to disable WPS mode.
Figure 105 – Wireless Security
The following parameters are available:
Select to enable or disable the WPS function of the NL1901ACV.
Select the SSID to apply the security settings to.
Select the Wireless security type to use with the wireless network.
The default is
.
The NL1901ACV also supports:
,
,
,
and
Enter the security key to use with the wireless network.
Enter the group rekey interval. This should not need to change.
Select the type of encryption to use on the wireless network.
To Next Page
Loading...
