NetComm NL1901ACV - Figure 51 - Enter DHCP Static IP Addresses; Table 19 - Ipv4 Autoconfig Settings Table

NL1901ACV Enhanced Hybrid 4G LTE Gateway – User Guide
52 of 146
UG01063 v. 1.0 December 2018
© NetComm Wireless 2018
PARAMETER
DEFINITION
Enable DHCP Server Relay
Disabled DHCP server, and relay all request to external server
specified by the IP address.
Configure the second IP
Address
This option enables you to set a secondary IP Address for the
NL1901ACV
Table 19 – IPv4 Autoconfig settings table
You can also reserve DHCP Addresses for specific hosts as shown below:
Figure 50 – Enter DHCP Static IP Addresses
To set a DHCP reservation, enter the MAC Address of the chosen host and IP to use and then click Apply/Save.
The NL1901ACV enables you to set the DHCP options which are provided to hosts attempting to connect to the
DHCP server.
These options should not normally need to be set or changed. Click
Apply/Save to save the new LAN configuration
settings.