NetComm NL1901ACV - Access Control

NL1901ACV Enhanced Hybrid 4G LTE Gateway – User Guide
120 of 146
UG01063 v. 1.0 December 2018
© NetComm Wireless 2018
Management – Access Control
The Access Control option found in the Management drop down menu configures access related parameters in
the following three areas:
Passwords
Access list
Services Control
Access Control is used to control local and remote management settings for your gateway.
Passwords
The Passwords option configures your account access username and password for your NL1901ACV gateway. Use
the fields illustrated in the screen below to change or create change either the username or the password, or both.
Usernames and passwords must be 16 alphanumeric characters or less with no spaces. Both are case sensitive.
Select
Management > Access Control > Passwords to access these controls.
Figure 133 – Access Control – Passwords
To change the username and/or the password:
1 Enter the current password into the
Username field.
2 If you want to change the username, enter the replacement name in the
New Username field.
If you do not want to change the username, enter the current username in the
New Username field.
3 If you want to change the password, enter the replacement alphanumeric string into the Old Password field.
If you do not want to change the password, enter the current password string into the
New Password field.
4 Always enter the same string of characters that are in the New Password field into the Confirm Password
field.
5 Click the
Apply/Save button to make the changes in your access settings.
You will be prompted to login using the new username and/or
password.
After successful login you will be prompted to remember the new
password.
Click the
Update password button.