NL1901ACV Enhanced Hybrid 4G LTE Gateway – User Guide
UG01063 v. 1.0 December 2018
First-time setup wizard
– While we highly recommend that you set up your new gateway using the First-time Setup Wizard (
), it is possible to
configure your new gateway directly from the
features.
It is also possible to initially set up your gateway using the Basic Setup wizard and then later fine-tune your configuration using the
Advanced Setup tools.
Follow the steps below to configure your NL1901ACV Wireless gateway via its web based configuration wizard.
1 Open a web browser and type http://192.168.20.1/ into the address bar at the top of the window.
2 At the login screen, type admin in the username and your NL1901ACV’s serial number (located on the label
pasted on the back of the device) into the password field, then click the
Login button.
– ‘
’ is the default username for the unit.
The gateway’s serial number is the default password for the unit.
Both the username and password can be changed in
Management > Access Control > Passwords
3 Click on the Basic Setup menu item on the left side of the screen.
Figure 4 – NL1901ACV gateway – Select Basic Setup
Select WAN Connection Type
4 The first step is to define your data connection type.
Select the WAN connection
type that you will be using.
or
To Next Page
Loading...
