NetComm NL1901ACV - Figure 11 - Select WAN Mode for VDSL Connection; Figure 12 - Select VLAN Option for VDSL Connection; Figure 13 - VDSL Connection - Enter Pppoe User ID and Password

NL1901ACV Enhanced Hybrid 4G LTE Gateway – User Guide
26 of 146
UG01063 v. 1.0 December 2018
© NetComm Wireless 2018
b Select the WAN mode for your internet connection as specified by your Internet Service Provider (ISP).
Figure 11 – Select WAN mode for VDSL connection
Click the Next button.
c Select the correct VLAN option for your connection.
For New Zealand customers, the requirement for VDSL is
VLAN tag 10.
If you are not sure of the tagging requirement for your connection, please contact your ISP.
Figure 12 – Select VLAN option for VDSL connection
Click the Next button.
d In the
User ID and Password fields, enter the username and password assigned to you by your Internet
Service Provider (ISP).
Figure 13 – VDSL connection – Enter PPPoE User ID and Password
e If you plan to use a SIM card for fallback protection via a mobile network connection, select  Enable
Mobile Broadband Backup and enter the Network Name (APN) and the Username and Password, if
required. For more information on setting up fallback protection and unlocking the SIM, refer to the
Mobile Network section on page 30.
Note
– If you select 
Bridging
mode the 
Enable Mobile Broadband Backup
(
SIM
card fallback protection) option is not available.