NL1901ACV Enhanced Hybrid 4G LTE Gateway – User Guide
UG01063 v. 1.0 December 2018
IPv6 Autoconfig
The IPv6 LAN Auto Configuration page allows you to configure settings pertaining to the IPv6 service.
Figure 51 – IPv6 LAN Auto Configuration page
Enable Unique Local
Addresses and Prefix
Advertisement
Enable the use of unique local addresses. The gateway will
advertise the IPv6 /64 prefix to new devices on the network.
Randomly generates the unique local addresses and the prefix.
Enter a static IPv6 address for the gateway if one has been
assigned to you by your Internet Service Provider (ISP).
Enable IPv6 DHCP server
Enable DHCPv6 Server
or RADVD
The Gateway Advertisement Daemon (radvd) is an open-source
software product that implements link-local advertisements of
IPv6 gateway addresses and IPv6 routing prefixes using the
Neighbour Discovery Protocol (NDP) as specified in RFC 2461.
The Gateway Advertisement Daemon is used by system
administrators in stateless auto-configuration methods of
network hosts on Internet Protocol version 6 networks.
When IPv6 hosts configure their network interfaces, they
broadcast gateway solicitation (RS) requests onto the network to
discover available gateways. The radvd software answers
requests with gateway advertisement (RA) messages. In addition,