NetComm NL1901ACV - IP Tunnel Configuration; IPv6 in IPv4 Tunnel Setup; IPv4 in IPv6 Tunnel Setup

NL1901ACV Enhanced Hybrid 4G LTE Gateway – User Guide
80 of 146
UG01063 v. 1.0 December 2018
© NetComm Wireless 2018
IP Tunnel
The IP Tunnelling feature allows you to configure tunnelling of traffic between IPv6 and IPv4 network using a
tunnelling service.
IPv6inIPv4
To use IPv6inIPv4 tunnelling service an active subscription to a tunnelling provider are required.
Figure 97 – IPv6inIPv4 Tunnel list
Click the Add button to add a new tunnel.
Figure 98 – 6in4 Tunnel configuration
IPv4inIPv6
Your ISP must support the DS-Lite IPv4inIPv6 tunnelling service, to enable this feature
Figure 99 – IPv4inIPv6 Tunnel list
Click the Add button to add a new tunnel.