NL1901ACV Enhanced Hybrid 4G LTE Gateway – User Guide
UG01063 v. 1.0 December 2018
Factory Reset
The following screen appears when selecting Factory Reset from the Management > Settings submenu.
Click the
Restore Default Settings button to remove all user defined settings and then restore the gateway’s factory
default firmware settings.
Figure 124 – Settings – Factory Reset page
Allow up to five minutes for system reset and automatic reboot. Then log in using the Sign in page.
Management – System Log
The System log page allows you to view the log of the gateway and configure the logging level also. To view the
system log, click the
View System Log button.
Figure 125 – Management – View System Log
Configure Log Output
To configure the system log’s content and destination click the Configure System Log button.
Figure 126 – Management – Configure System Log
To Next Page
Loading...
