NL1901ACV Enhanced Hybrid 4G LTE Gateway – User Guide
UG01063 v. 1.0 December 2018
Wireless – Basic
The Basic Wireless configuration page allows you to enable the wireless network and configure its basic settings.
Figure 104 – Wireless - Basic Configuration
The following parameters are available:
Select
to activate the wireless network function.
Select to hide the wireless network when an SSID scan is
Select to prevent clients on the wireless network being able to
access each other.
Select to prevent the NL1901ACV advertising its WMM QoS
function
Enable Multicast
Forwarding (WMF)
Wireless Multicast Forwarding can reduce latency and improve
throughput for wireless clients.
Enter the maximum number of wireless clients able to connect to
the wireless network
Wireless Guest /
Virtual Access Points
Select to enable a separate Wireless Guest network.
For each Guest network enter the same options as are available in
the top of this page for the main system wireless network.
Table 35 – Basic Wireless settings table
Click Apply/Save to save the new wireless configuration settings.
– Hiding the network may leads to potential connection problems, a non-broadcast network is not undetectable, and hiding a SSID is
Security through obscurity
To Next Page
Loading...
