NetComm NL1901ACV - Bridging Mode; Mobile Broadband Setup

NL1901ACV Enhanced Hybrid 4G LTE Gateway – User Guide
47 of 146
UG01063 v. 1.0 December 2018
© NetComm Wireless 2018
Bridging
When you select  Bridging mode, a summary of the settings is displayed.
Figure 45 – WAN Setup - Bridging
Click Apply/Save to commit the settings.
Mobile Broadband
The Mobile Broadband page displays the current Wide Area Network service setup and allows you to configure
the gateway to connect to a mobile (cellular) network for primary Internet access.
Only one
Mobile Broadband can be set up at a time. You can alter the setup by clicking the Edit button, or
Remove the setup and Add a new service.
Figure 46 – NL1901ACV Mobile Broadband setup
FIELD
DESCRIPTION
Gateway status
indicator
In the top left corner above the start of the table is the
Gateway
status
indicator:
dialling…
,
CONNECTED
,
Manual Dialled,
undialing…
,
DISCONNECT
,
SIM CARD INVALID OR NOT SIM
CARD!
, etc.
Interface
The interface of the mobile connection.
Description
The description of the mobile connection.
Type
The type of WAN connection.
Vlan802.1p
N/A for mobile interface.
VlanMuxId
N/A for mobile interface.