NetComm NL1901ACV - Routing; Default Gateway Configuration; Static Route Configuration

NL1901ACV Enhanced Hybrid 4G LTE Gateway – User Guide
69 of 146
UG01063 v. 1.0 December 2018
© NetComm Wireless 2018
Routing
The Default Gateway, Static Route, Policy Routing and Dynamic Route settings can be found in the Routing option
of the Advanced menu.
Default Gateway
Select your preferred WAN interface from the available options.
Use the arrow buttons to move the available Routed WAN Interfaces listed on the right to the group of required
Default Gateway Interfaces in the list on the left.
Figure 77 – Routing – Set Default Gateway
Use the arrow buttons to move the interfaces required as DNS Server interfaces to the left.
The interface highest on the list has the highest priority as a DNS server.
Click
Apply/Save to commit your settings to the gateway.
Static Route
The Static Route screen displays the configured static routes. Click the Add or Remove buttons to change settings.
Figure 78 – Routing – Static Route list