NL1901ACV Enhanced Hybrid 4G LTE Gateway – User Guide
UG01063 v. 1.0 December 2018
Select Enabled to turn off the acknowledgement request. This can be useful
for Voice transmissions where speed of transmission is important and packet
loss is tolerable to a certain degree.
This setting is only available when
(
) is set to Auto or
Enabled.
(Automatic Power Save Delivery) is an improvement to the
802.11e amendment adding advanced power management functionality to
WMM.
Select Enabled to ensure very low power consumption.
(
)
Select
(Single-User)
to concentrate the transmission signal at the
gateway location. This results in a better signal and potentially better
throughput.
(
)
Select
(Single-User)
to concentrate the transmission signal at the
gateway location.
Select
to detect if the client has the ability to use two bands. When
enabled, the less-congested 5GHz network is selected (by blocking the
client's 2.4GHz network).
Select
to allow scheduling of traffic to improve efficiency and
increase usable bandwidth for some types of packets by delaying other types.
Select
to allow the gateway to manage the receiving signal with
other devices.
Table 37 -Wireless – Advanced configuration settings
Wireless – Station Info
This page shows the MAC address of authenticated wireless stations that are connected to the NL1901ACV and
their status
Figure 110 – Wireless – Station Info list
To Next Page
Loading...
