NetComm NL1901ACV - Low Priority QoS Queue Configuration

NL1901ACV Enhanced Hybrid 4G LTE Gateway – User Guide
131 of 146
UG01063 v. 1.0 December 2018
© NetComm Wireless 2018
Figure 144 – QoS – Queue Configuration 1
3 Enter a Name of 15 characters or less to reflect the device that will have high priority QoS, e.g.
PC1HighPriority.
4 Set the Enable option to Enable.
5 Set the
Interface (Australian customers use atm0(0_8_35), NZ customers use atm0(0_0_100)).
6 Enter a
Queue Precedence. The lower the value, the higher the priority. For the highest priority, set it to
1(WRR/WFQ).
7 Select one of the
Scheduler Algorithms:

Weighted Round Robin – All services given equal, sequential access.

Weighted Fair Queuing – More access given to specified services.
8 Set the
Queue Weight from 1 to 63.
9 Set the
DSL Latency as Path0.
10 Click the
Save/Apply button.
Low Priority QoS Queue Configuration
1 Select Advanced > Quality of Service > QoS Queue > Queue Configuration.
2 Click the
Add button.