NL1901ACV Enhanced Hybrid 4G LTE Gateway – User Guide
UG01063 v. 1.0 December 2018
4 Click the Add Entries button.
5 Enter the MAC address of the computer/device you are connecting to the gateway. The MAC address is a 12
character set of numbers and letters (A-F), where every 2 characters separated by a colon (:).
6 Enter the IP address of the computer/device. This is the local address in the range of 192.168.20.x where x =
a number between 2 and 254.
Figure 140 – DHCP Static IP Lease details
7 Click the Apply/Save button.
8 Complete steps 4 through 7 for each device connected to the NL1901ACV gateway. Each entry will be listed
in the Static IP Lease List as shown below.
Figure 141 – LAN Setup
To Next Page
Loading...
