8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP or 2 Copper Ports and)
Cloud Management
Get Started User Manual21
• Mozilla Firefox. If Mozilla Firefox displays a Your connection is not secure message,
click the ADVANCED button. Then, click the Add Exception button. In the pop-up
window that opens, click the Confirm Security Exception button and install a
security certificate.
• Microsoft Internet Explorer. If Microsoft Internet Explorer displays a There is a
problem with this website’s security certificate message, click the Continue to this
website (not recommended) link and install a security certificate.
• Microsoft Edge. If Microsoft Edge displays a There is a problem with this website’s
security certificate message or a similar warning, select Details > Go on to the
webpage and install a security certificate.
10. Enter one of the following credentials:
• NETGEAR email address and password. If this is the first time that you log in to the
local browser interface, click the Login button, and follow the directions onscreen to
register the switch with your NETGEAR email address and password.
If you did not yet create a NETGEAR account, click the Create button, follow the
directions onscreen to create an account, and then register the switch with your
NETGEAR email address and password.
• Local device password. If you previously logged in to the local browser interface and
registered the switch with your NETGEAR email address and password, enter the local
device password.
By default, the local device password is password.
Note: If you did not yet register the switch, you can log in to the local browser
interface with the local device password and access the maintenance
features. To access all features, register your switch. For more
information, visit the NETGEAR knowledge base at
netgear.com/support and search for the following article:
What features of my NETGEAR Smart Managed Pro Switch can I
access without registering.
• Insight network password. Under the following circumstances, enter the Insight
network password for the last Insight network location:
- You previously logged in to the local browser interface and registered the switch
with your NETGEAR email address and password.
- You changed the management mode to NETGEAR Insight Mobile App and
Insight Cloud Portal.
- You changed the management mode back to Direct Connect Web-browser
Interface.
Note: You must continue to use the Insight network password until you
manually change the local device password.
For information about the credentials, see Credentials for the local browser interface on
page 32.
11. Click the Login button.
The System Information page displays.
To Next Page
Loading...
Need help?
General