EasyManuals Logo

NETGEAR GS110TPv3 User Manual

NETGEAR GS110TPv3
492 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #57 background imageLoading...
Page #57 background image
8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP or 2 Copper Ports and)
Cloud Management
Configure System Information User Manual57
Configure the IP network settings for
management access
You can configure network information for the local browser interface, which is the logical
interface used for in-band connectivity with the switch through any of the switch’s front-panel
ports. The settings associated with the local browser interface do not affect the configuration
of the front panel ports through which traffic is switched or routed.
Configure the IPv4 network and VLAN settings for the
local browser interface
You can configure the IPv4 network information for the local browser interface, which is the
logical interface used for in-band connectivity with the switch through any of the switch’s
front-panel ports.
To configure the IPv4 network and VLAN settings for the local browser interface:
1. Connect your computer to the same network as the switch.
You can use a WiFi or wired connection to connect your computer to the network, or
connect directly to a switch that is off-network using an Ethernet cable.
2. Launch a web browser.
3. In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see Access the switch on-network and
connected to the Internet on page 19 or Access the switch off-network on page 30.
The login page displays.
If the NETGEAR Business page displays, see Register and access the switch with your
NETGEAR account on page 34.
4. Enter one of the following passwords:
• After registration, enter the local device password.
By default, the local device password is password.
• If you previously managed the switch through the Insight app or Cloud portal, enter
the Insight network password for the last Insight network location.
For information about the credentials, see Credentials for the local browser interface on
page 32.
5. Click the Login button.
The System Information page displays.
6. Select System > Management > IP Configuration.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the NETGEAR GS110TPv3 and is the answer not in the manual?

NETGEAR GS110TPv3 Specifications

General IconGeneral
BrandNETGEAR
ModelGS110TPv3
CategorySwitch
LanguageEnglish

Related product manuals