8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP or 2 Copper Ports and)
Cloud Management
Get Started User Manual29
Access the switch on-network when you know the switch IP
address
If the switch is on-network and you know the switch IP address, you can access the local
browser interface.
For the following procedure, the network must provide Internet access.
To access the switch on-network when you know the switch IP address:
1. Launch a web browser.
2. In the address field of your web browser, enter the IP address of the switch.
The NETGEAR Business page displays. However, if you logged in previously, the login
page displays.
3. If your browser does not open the NETGEAR Business page but displays a security
message and does not let you proceed, do one of the following:
• Google Chrome. If Google Chrome displays a Your connection is not private
message, click the ADVANCED link. Then, click the Proceed to x.x.x.x (unsafe) link,
in which x.x.x.x represents the IP address of the switch, and install a security
certificate.
• Apple Safari. If Apple Safari displays a This connection is not private message, click
the Show Details button. Then, click the visit this website link. If a warning pop-up
window opens, click the Visit Website button. If another pop-up window opens to let
you confirm changes to your certificate trust settings, enter your Mac user name and
password and click the Update Setting button.
• Mozilla Firefox. If Mozilla Firefox displays a Your connection is not secure message,
click the ADVANCED button. Then, click the Add Exception button. In the pop-up
window that opens, click the Confirm Security Exception button and install a
security certificate.
• Microsoft Internet Explorer. If Microsoft Internet Explorer displays a There is a
problem with this website’s security certificate message, click the Continue to this
website (not recommended) link and install a security certificate.
• Microsoft Edge. If Microsoft Edge displays a There is a problem with this website’s
security certificate message or a similar warning, select Details > Go on to the
webpage and install a security certificate.
4. Enter one of the following credentials:
• NETGEAR email address and password. If this is the first time that you log in to the
local browser interface, click the Login button, and follow the directions onscreen to
register the switch with your NETGEAR email address and password.
If you did not yet create a NETGEAR account, click the Create button, follow the
directions onscreen to create an account, and then register the switch with your
NETGEAR email address and password.
To Next Page
Loading...
Need help?
General