8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP or 2 Copper Ports and)
Cloud Management
Manage Device Security User Manual326
8. From the Server Address Type menu, select IPv4 or DNS to indicate the format for the
TFTP Server IP field.
The default is IPv4.
9. In the TFTP Server IP field, specify the address or host name of the TFTP server.
The address can be an IP address in standard x.x.x.x format or a host name. The host
name must start with a letter of the alphabet.
10. In the Remote File Path field, enter the path of the file to download.
You can enter up to 96 characters. The default is blank.
11. In the Remote File Name field, enter the name of the file on the TFTP server to download.
You can enter up to 32 characters. The default is blank.
12. Select the Start File Transfer check box.
13. Click the Apply button.
The file transfer starts. A status message displays during the transfer and upon
successful completion of the transfer.
Control access with profiles and rules
Access control allows you to configure an access control profile and set rules for access to
the local browser interface, access by SNMP stations, and client access to a TFTP server.
We refer to an access control profile as an access profile. You can add a single access
profile, which you can configure, activate, or deactivate.
CAUTION:
If you configure a security access profile incorrectly and you activate the
access profile, you might no longer be able to access the switch’s local
browser interface. If that situation occurs, you must reset the switch to
factory default settings (see
Reset the switch to its factory default settings
on page 438).
To Next Page
Loading...
Need help?
General