8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP or 2 Copper Ports and)
Cloud Management
Manage Device Security User Manual401
5. Click the Login button.
The System Information page displays.
6. Select Security > ACL > Advanced > IPv6 Rules.
The IPv6 Rules page displays.
7. From the ACL Name menu, select the ACL that includes the rule that you want to delete.
8. In the IPv6 ACL Rule Table, select the check box that is associated with the rule.
9. Click the Delete button.
The rule is removed.
Configure IP ACL interface bindings
When you bind a basic IPv4, extended IPv4, or IPv6 ACL to an interface, all the rules that
you defined for the IP ACL are applied to the selected interface.
If resources on the switch are insufficient, an attempt to bind an ACL to an interface fails.
To bind an IP ACL to one or more interfaces:
1. Connect your computer to the same network as the switch.
You can use a WiFi or wired connection to connect your computer to the network, or
connect directly to a switch that is off-network using an Ethernet cable.
2. Launch a web browser.
3. In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see Access the switch on-network and
connected to the Internet on page 19 or Access the switch off-network on page 30.
The login page displays.
If the NETGEAR Business page displays, see Register and access the switch with your
NETGEAR account on page 34.
4. Enter one of the following passwords:
• After registration, enter the local device password.
By default, the local device password is password.
• If you previously managed the switch through the Insight app or Cloud portal, enter
the Insight network password for the last Insight network location.
For information about the credentials, see Credentials for the local browser interface on
page 32.
5. Click the Login button.
The System Information page displays.
6. Select Security > ACL > Advanced > IP Binding Configuration.
To Next Page
Loading...
Need help?
General