8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP or 2 Copper Ports and)
Cloud Management
Specifications and Default Settings User Manual489
Traffic control settings
The following table describes the traffic control settings.
Table 85. Traffic control settings
Feature Sets Supported Default
Storm control All ports Disabled
Jumbo frame All ports 1522
Max = 10,000 bytes
Quality of Service settings
The following table describes the Quality of Service settings.
Table 86. Quality of Service settings
Feature Sets Supported Default
Number of queues 8 N/A
802.1p 1 Enabled
DSCP 1 Disabled
Egress Rate limiting All ports Disabled
Port trunking (aggregation) 8 Preconfigured
802.1D spanning tree 1 Disabled
802.1w RSTP 1 Enabled
802.1s spanning tree 8 instances Disabled
Static 802.1Q tagging 256 VID = 1
Max member ports are equal to
the number of ports on the switch
Learning process Supports static and dynamic MAC
entries
Dynamic learning is enabled by
default
Table 84. Port characteristics (continued)
Feature Sets Supported Default
To Next Page
Loading...
Need help?
General