8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP or 2 Copper Ports and)
Cloud Management
Manage Device Security User Manual395
The previous figure does not show all columns on the page.
If no rules exists, the IPv6 ACL Rule Table might show the message No rules were
configured for this
ACL. If one or more rules exist for the ACL, the rules display in the
IPv6 Rules table.
7. From the ACL Name menu, select the IPv6
ACL for which you want to add a rule.
An IPv6 ACL can contain up to 50 rules.
8. Click the Add button.
9. Configure the following match criteria for the rule:
• Action. Select the
ACL forwarding action by selecting one of the following radio
buttons:
- Permit. Forward packets that meet the
ACL criteria.
- Deny. Drop packets that meet the
ACL criteria.
• Egress Queue. If you select the Permit radio button, select the hardware egress
queue identifier that is used to handle all packets matching this IPv6
ACL rule. The
range of queue IDs is 0 to 7.
To Next Page
Loading...
Need help?
General