8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP or 2 Copper Ports and)
Cloud Management
Maintain or Troubleshoot the Switch User Manual455
For information about the credentials, see Credentials for the local browser interface on
page 32.
5. Click the Login button.
The System Information page displays.
6. Select Maintenance > T
roubleshooting > Ping IPv6.
7. From the Ping menu, select the type of ping:
• Global. Pings a global IPv6 address.
• Link Local. Pings a link-local IPv6 address over a specified interface. With this
selection, the Interface menu displays, and you must select the interface.
8. In the IPv6 Address/Hostname field, enter the IPv6 address or host name of the station
that must be pinged.
The format is xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx. The maximum number of
characters is 255.
9. In the Count field, enter the number of echo requests that must be sent.
The range is 1 to 15. The default value is 3.
10. In the Interval field, enter the time in seconds between ping packets.
The range is 1 to 60. The default value is 3.
11. In the Datagram Size field, enter the datagram size.
The valid range is 0 to 13000. The default value is 0 bytes.
12. From the Source menu, as an option, you can select the IP address or interface that must
be used to send echo request packets:
• None.
The source address of the ping packet is the address of the default egress
interface.
To Next Page
Loading...
Need help?
General