Firewall Protection
138
ProSecure Unified Threat Management (UTM) Appliance
Figure 72.
2. Enter the settings as explained in Table 27 on page 124.
3. Click Apply. The new rule is now added to the Outbound Services table. The rule is
automatically enabled.
LAN DMZ Inbound Service Rules
The Inbound Services table lists all existing rules for inbound traffic. If you have not defined
any rules, no rules are listed. By default, all inbound traffic (from the LAN to the DMZ) is
blocked.
 To create a new inbound LAN DMZ service rule:
1. In the LAN DMZ Rules screen, click the Add table button under the Inbound Services
table. The Add LAN DMZ Inbound Service screen displays:
Figure 73.
To Next Page
Loading...
Need help?
General
