To Next Page

To Previous Page

Managing Users, Authentication, and VPN Certificates

361

ProSecure Unified Threat Management (UTM) Appliance

Note: You cannot delete a default group such as one that was

automatically created when you specified a new domain on the

second SSL VPN Wizard screen (see SSL VPN Wizard Step 2 of 6

(Domain Settings) on page 310). You can delete only the domain

with which the default group is associated and that has an identical

name as the default group (see Configure Domains on page 353).

Deleting the domain causes the default group to be removed.

Edit Groups

 To edit a VPN group:

1. Select Users > Groups. The Groups screen displays (see the previous figure).

2. In the Action column of the List of Groups table, click the Edit table button for the group that

you want to edit. The Edit Groups screen displays:

Figure 218.

With the exception of groups that are associated with domains that use the LDAP

authentication method, you can modify only the idle time-out settings. You can never

modify the Group Name and Group’s Auth Type fields.

3. Modify the idle time-out period in minutes in the Idle Timeout field. For a group that is

associated with a domain that uses the LDAP authentication method, configure the LDAP

attributes (in fields 1 through 4) as needed.

4. Click Apply to save your changes. The modified group is displayed in the List of Groups

table.

NETGEAR UTM9S Reference Manual

Other manuals for NETGEAR UTM9S