Network and System Management
406
ProSecure Unified Threat Management (UTM) Appliance
3. Installing the downloaded firmware version.
4. Rebooting the UTM with the new firmware version.
These stages are explained in detail in the following sections.
View the Available Firmware Versions
To view the current version of the firmware that your UTM is running and the other
available firmware versions:
1. Select Administration > System Update > Firmware. The Firmware screen displays:
Figure 244. Firmware screen, available versions
The Firmware Reboot section shows the following information fields for both the active
and secondary (that is, nonactive) firmware:
• Type. Active or secondary firmware.
• Version. The firmware version.
• Status. The status of the firmware (ok or corrupted).
2. To see which other firmware versions are available, click Query under the Firmware
Download section to allow the UTM to connect to the NETGEAR update server. The
Firmware Download section shows the available firmware versions, including any new
versions, and the date when the current firmware version was downloaded to the UTM.
To Next Page
Loading...
