xDSL Module for the UTM9S
506
ProSecure Unified Threat Management (UTM) Appliance
2. Click the Edit button in the Action column of the SLOT-x entry to automatically configure the
connection to the Internet. The SLOT-x ISP Settings screen displays. (The following figure
shows the SLOT-2 ISP Settings screen.)
Figure 298.
3. Click the Auto Detect button at the bottom of the screen. The autodetect process probes
the WAN port for a range of connection methods and suggests one that your ISP is most
likely to support.
The autodetect process returns one of the following results:
• If the autodetect process is successful, a status bar at the top of the screen displays
the results (for example, DHCP service detected).
To Next Page
Loading...
