NETGEAR XS708T User Manual

Configure Routing
203
XS708T, XS712Tv2, and XS716T Smart Managed Pro Switch User Manual
IcmpInErrors The number of ICMP messages that the entity received but determined as
having ICMP-specific errors (bad ICMP checksums, bad length, and so on).
IcmpInDestUnreachs The number of ICMP destination unreachable messages received.
IcmpInTimeExcds The number of ICMP time exceeded messages received.
IcmpInParmProbs The number of ICMP parameter problem messages received.
IcmpInSrcQuenchs The number of ICMP source quench messages received.
IcmpInRedirects The number of ICMP redirect messages received.
IcmpInEchos The number of ICMP echo (request) messages received.
IcmpInEchoReps The number of ICMP echo reply messages received.
IcmpInTimestamps The number of ICMP timestamp (request) messages received.
IcmpInTimestampReps The number of ICMP timestamp reply messages received.
IcmpInAddrMasks The number of ICMP address mask request messages received.
IcmpInAddrMaskReps The number of ICMP address mask reply messages received.
IcmpOutMsgs The total number of ICMP messages that this entity attempted to send. This
counter includes all those counted by icmpOutErrors.
IcmpOutErrors The number of ICMP messages that this entity did not send due to
problems discovered within ICMP such as a lack of buffers. This value does
not include errors discovered outside the ICMP layer such as the inability of
IP to route the resultant datagram. In some implementations there might be
no types of error that contribute to this counter's value.
IcmpOutDestUnreachs The number of ICMP destination unreachable messages sent.
IcmpOutTimeExcds The number of ICMP time exceeded messages sent.
IcmpOutParmProbs The number of ICMP parameter problem messages sent.
IcmpOutSrcQuenchs The number of ICMP source quench messages sent.
IcmpOutRedirects The number of ICMP redirect messages sent. For a host, this is always
zero, since hosts do not send redirects.
IcmpOutEchos The number of ICMP echo (request) messages sent.
IcmpOutEchoReps The number of ICMP echo reply messages sent.
IcmpOutTimestamps The number of ICMP timestamp (request) messages.
IcmpOutTimestampReps The number of ICMP timestamp reply messages sent.
IcmpOutAddrMasks The number of ICMP address mask request messages sent.
Table 55. IP Statistics information (continued)
Field Description

NETGEAR XS708T Specifications

General

Switch type	Managed
Switch layer	L2+/L3
Quality of Service (QoS) support	Yes
USB 2.0 ports quantity	1
SFP+ module slots quantity	2
Installed SFP modules quantity	-
Basic switching RJ-45 Ethernet ports type	10G Ethernet (100/1000/10000)
Basic switching RJ-45 Ethernet ports quantity	8
Certification	CE, FCC Cl. A, VCCI Cl. A, Cl. A EN 55022 (CISPR 22), Cl. A C-Tick, EN 55024, CCC
Product color	Black
LED indicators	Activity, Link, Power
Number of fans	1 fan(s)
Number of VLANs	256
Networking standards	IEEE 802.1D, IEEE 802.1Q, IEEE 802.1ab, IEEE 802.1p, IEEE 802.1s, IEEE 802.1w, IEEE 802.1x, IEEE 802.3, IEEE 802.3ad, IEEE 802.3ae, IEEE 802.3an, IEEE 802.3az, IEEE 802.3u, IEEE 802.3x, IEEE 802.3z
Virtual LAN features	Private VLAN, Protocol-based VLAN
Cable types supported	Cat5e, Cat6, Cat6a, Cat7
Copper ethernet cabling technology	10GBASE-T
Noise level	29.1 dB
Flash memory	256 MB
Internal memory	512 MB
Processor frequency	600 MHz
Mean time between failures (MTBF)	276832 h
Jumbo frames	9000
Latency (10 Gbps)	3.012 µs
MAC address table	16000 entries
Packet buffer memory	2 MB
Number of static routes	32
DHCP features	DHCP server, DHCP client
Security algorithms	802.1x RADIUS
Access Control List (ACL) rules	100
AC input voltage	100 - 240 V
AC input frequency	50 - 60 Hz
Power consumption (max)	96 W
Operating altitude	0 - 3000 m
Operating temperature (T-T)	0 - 50 °C
Operating relative humidity (H-H)	0 - 90 %
Cables included	AC

Weight and Dimensions

Depth	204 mm
Width	440 mm
Height	43 mm
Weight	2980 g