Nokia 7330 - 6.5 Configuration Notes; 6.6 Configuring Logging with CLI; Log Configuration Overview

Events and Logs
112
"FD 100/320Gbps NT and FX NT IHub System
Basics, Management and OAM Guide"
3HH-11982-AAAA-TQZZA Issue: 10
log-id 99
description "Default System Log"
no filter
from main
to memory
no shutdown
exit
log-id 100
description "Default Serious Errors Log"
filter 1001
from main
to memory
no shutdown
exit
----------------------------------------------
ALA-1>configure>log#
The following displays the clearing of default system Log 99:
ALA-1>clear# log 99
The following displays the error that results when deleting default system logs:
ALA-1># configure log no log-id 99
6.5 Configuration Notes
The following logging configuration caveats apply:
• A filter cannot be deleted if it has been applied to a log.
• A file ID can only be assigned to one log ID.
6.6 Configuring Logging with CLI
This section provides information to configure logging using the Command Line
Interface (CLI).
6.6.1 Log Configuration Overview
Configure logging parameters to save information in a log file or direct the messages
to other devices. Logging does the following:
• Provides you with logging information for monitoring and troubleshooting.
• Allows you to select the types of logging information to be recorded.
Note — CLI is not able to delete log-id 99 or log-id 100,
because both log IDs are default logger storage.