Nokia 7330 - Table 91 Ip Command

"FD 100/320Gbps NT and FX NT IHub System
Basics, Management and OAM Guide"
Monitor Commands
Issue: 10 3HH-11982-AAAA-TQZZA 79
5.3.1.2 ip
Table 91 ip command
Sample output:
A:ALA-1>monitor# filter ip 10 entry 1 interval 5 repeat 3 absolute
============================================================================
Monitor statistics for IP filter 10 entry 1
============================================================================
At time t = 0 sec (Base Statistics)
----------------------------------------------------------------------------
Ing. Matches: 0 Egr. Matches : 0
Description This command enables the context to configure criteria to monitor IP and MAC filter statistics.
Item Description
(2 of 2)
Item Description
Syntax ip ip-filter-id entry entry-id [interval seconds] [repeat repeat] [absolute | rate]
Context monitor>filter
Description This command enables IP filter monitoring. The statistical information for the specified IP filter
entry displays at the configured interval until the configured count is reached.
The first screen displays the current statistics related to the specified IP filter. The subsequent
statistical information listed for each interval is displayed as a delta to the previous display.
When the keyword rate is specified, the “rate per second” for each statistic is displayed instead
of the delta.
Monitor commands are similar to show commands but only statistical information displays.
Monitor commands display the selected statistics according to the configured number of times
at the interval specified.
Parameters ip-filter-id — Displays detailed information for the specified filter ID and its filter entries.
Values: 1 — 65535
entry entry-id — Displays information on the specified filter entry ID for the specified filter ID
only.
Values: 1 — 65535
interval seconds — Configures the interval for each display in seconds.
Default: 10 seconds
Values: 5 — 60
repeat repeat — Configures how many times the command is repeated.
Default: 10
Values: 1 — 999
absolute — When the absolute keyword is specified, the raw statistics are displayed, without
processing. No calculations are performed on the delta or rate statistics.
rate — When the rate keyword is specified, the rate-per-second for each statistic is displayed
instead of the delta.