Nokia 7330 Basics, Management And Oam Guide

"FD 100/320Gbps NT and FX NT IHub System
Basics, Management and OAM Guide"
Monitor Commands
Issue: 10 3HH-11982-AAAA-TQZZA 81
5.3.1.4 mac
Table 93 mac command
Description This command enables IPv6 filter monitoring. The statistical information for the specified IPv6
filter entry displays at the configured interval until the configured count is reached.
The first screen displays the current statistics related to the specified IPv6 filter. The
subsequent statistical information listed for each interval is displayed as a delta to the previous
display.
When the keyword rate is specified, the “rate per second” for each statistic is displayed instead
of the delta.
Monitor commands are similar to show commands but only statistical information displays.
Monitor commands display the selected statistics according to the configured number of times
at the interval specified.
Parameters ipv6-filter-id — Displays detailed information for the specified IPv6 filter ID and its filter entries.
Values: 1 — 65535
entry entry-id — Displays information on the specified IPv6 filter entry ID for the specified filter
ID only.
Values: 1 — 65535
interval seconds — Configures the interval for each display in seconds.
Default: 10 seconds
Values: 5 — 60
repeat repeat — Configures how many times the command is repeated.
Default: 10
Values: 1 — 999
absolute — When the absolute keyword is specified, the raw statistics are displayed, without
processing. No calculations are performed on the delta or rate statistics.
rate — When the rate keyword is specified, the rate-per-second for each statistic is displayed
instead of the delta.
Item Description
(2 of 2)
Item Description
Syntax mac mac-filter-id entry entry-id [interval seconds] [repeat repeat] [absolute | rate]
Context monitor>filter
Description This command enables MAC filter monitoring. The statistical information for the specified MAC
filter entry displays at the configured interval until the configured count is reached.
The first screen displays the current statistics related to the specified MAC filter. The
subsequent statistical information listed for each interval is displayed as a delta to the previous
display. When the rate keyword is specified, the “rate per second” for each statistic is displayed
instead of the delta.
Monitor commands are similar to show commands but only statistical information displays.
Monitor commands display the selected statistics according to the configured number of times
at the interval specified.
(1 of 2)

Nokia 7330 Specifications

General

Brand	Nokia
Model	7330
Category	Network Hardware
Language	English