"FD 100/320Gbps NT and FX NT IHub System
Basics, Management and OAM Guide"
Monitor Commands
Issue: 10 3HH-11982-AAAA-TQZZA 91
At time t = 10 sec (Mode: Rate)
----------------------------------------------------------------------------
ISIS Instance : 1 SPF Runs : 0
Purge Initiated : 0 LSP Regens. : 0
CSPF Statistics
Requests : 0 Request Drops : 0
Paths Found : 0 Paths Not Found: 0
----------------------------------------------------------------------------
PDU Type Received Processed Dropped Sent Retransmitted
----------------------------------------------------------------------------
LSP00000
IIH00010
CSNP00000
PSNP00000
Unknown 0 0 0 0 0
============================================================================
A:ALA-12>monitor>router>isis#
5.3.4.4 session
Table 99 session command
Item Description
Syntax session ldp-id [ldp-id...(up to 5 max)]
[interval seconds] [repeat repeat] [absolute | rate]
Context monitor>router>ldp
Description This command displays statistical information for LDP sessions at the configured interval until
the configured count is reached.
The first screen displays the current statistics related to the specified LDP session(s). The
subsequent statistical information listed for each interval is displayed as a delta to the previous
display.
When the rate keyword is specified, the “rate per second” for each statistic is displayed instead
of the delta.
Monitor commands are similar to show commands but only statistical information displays.
Monitor commands display the selected statistics according to the configured number of times
at the interval specified.
(1 of 2)
To Next Page
Loading...
