Nokia 7330 - Entry; Table 116 Entry Command

Events and Logs
126
"FD 100/320Gbps NT and FX NT IHub System
Basics, Management and OAM Guide"
3HH-11982-AAAA-TQZZA Issue: 10
6.8.4.2 entry
Table 116 entry command
Description This command specifies a drop or forward action associated with the filter entry.
Multiple action statements entered will overwrite previous actions.
The no form of the command removes the specified action statement.
Parameters drop — Specifies packets matching the entry criteria will be dropped.
forward — Specifies packets matching the entry criteria will be forwarded.
Item Description
(2 of 2)
Item Description
Syntax [no] entry entry-id
Context configure>log>filter filter-id
Description This command is used to create or edit an event filter entry. Multiple entries may be created
using unique entry-id numbers. The TiMOS implementation exits the filter on the first match
found and executes the action in accordance with the action command.
Comparisons are performed in an ascending entry ID order. When entries are created, they
should be arranged sequentially from the most explicit entry to the least explicit. Matching
ceases when a packet matches an entry. The entry action is performed on the packet, either
drop or forward. To be considered a match, the packet must meet all the conditions defined in
the entry.
An entry may not have any match criteria defined (in which case, everything matches) but must
have at least the keyword action for it to be considered complete. Entries without the action
keyword will be considered incomplete and are rendered inactive.
The no form of the command removes the specified entry from the event filter. Entries
removed from the event filter are immediately removed from all log-id’s where the filter is
applied.
Default No event filter entries are defined. An entry must be explicitly configured.
Parameters entry-id — The entry ID uniquely identifies a set of match criteria corresponding action within
a filter. Entry ID values should be configured in staggered increments so you can insert a new
entry in an existing policy without renumbering the existing entries.
Values: 1 — 999