Monitor Commands
86
"FD 100/320Gbps NT and FX NT IHub System
Basics, Management and OAM Guide"
3HH-11982-AAAA-TQZZA Issue: 10
Packets 39 175
Errors 0 0
============================================================================
A:ALA-12>monitor#
A:ALA-12>monitor# nt-a:sfp:1 interval 5 repeat 3 rate
============================================================================
Monitor statistics for nt-a:sfp:1
============================================================================
Input Output
----------------------------------------------------------------------------
At time t = 0 sec (Base Statistics)
----------------------------------------------------------------------------
Octets 0 0
Packets 39 175
Errors 0 0
----------------------------------------------------------------------------
At time t = 5 sec (Mode: Rate)
----------------------------------------------------------------------------
Octets 0 0
Packets 0 0
Errors 0 0
----------------------------------------------------------------------------
At time t = 10 sec (Mode: Rate)
----------------------------------------------------------------------------
Octets 0 0
Packets 0 0
Errors 0 0
----------------------------------------------------------------------------
At time t = 15 sec (Mode: Rate)
----------------------------------------------------------------------------
Octets 0 0
Packets 0 0
Errors 0 0
============================================================================
A:ALA-12>monitor#
5.3.4 Router Commands
5.3.4.1 router
Table 96 router command
Item Description
Syntax router router-id
Context monitor
Description This command enables the context to configure criteria to monitor statistical information for
BGP, ISIS, LDP, MPLS, OSPF and RIP protocols.
(1 of 2)