Nokia 7330 - Table 223 Two-Way-Delay-Test Command; Two-Way-Delay-Test

Ethernet Connection Fault Management
192
"FD 100/320Gbps NT and FX NT IHub System
Basics, Management and OAM Guide"
3HH-11982-AAAA-TQZZA Issue: 10
8.12.2.3 two-way-delay-test
Table 223 two-way-delay-test command
Parameters mac-address - Destination MAC address. Format:xx:xx:xx:xx:xx:xx or xx-xx-xx-xx-xx-xx
mep-id - MEP ID
Values: 1..8191
md-index - MD index.
Values: 1..4294967295
ma-index - MA index.
Values: 1..4294967295
ttl-value - TTL value
Values: 0..255
Default: 64
Item Description
(2 of 2)
Item Description
Syntax two-way-delay-test mac-address mep mep-id domain md-index association ma-index
[priority priority]
Context oam>eth-cfm
Description This command issues an ETH-CFM two-way delay test.
Parameters The parameters with their values and defaults are as follows:
• mac-address — Specifies a unicast MAC address.
• mep mep-id — Specifies the local mep-id.
Values: 1 — 8191
• domain md-index — Specifies the MD index.
Values: 1 — 4294967295
• association ma-index — Specifies the MA index.
Values: 1 — 4294967295
• priority priority — Specifies the priority.
Values: 0 — 7
Default: 7