Nokia 7330 - 9.3 LLDP CLI Commands; Lldp; LLDP Commands; Message-Fast-Tx

Link Layer Discovery Protocol
214
"FD 100/320Gbps NT and FX NT IHub System
Basics, Management and OAM Guide"
3HH-11982-AAAA-TQZZA Issue: 10
9.3 LLDP CLI Commands
9.3.1 LLDP Commands
9.3.1.1 lldp
Table 241 lldp command
9.3.1.2 message-fast-tx
Table 242 message-fast-tx command
Item Description
Syntax lldp
Context configure>system
Description This command enables the context to configure system-wide Link Layer Discovery Protocol
(LLDP) parameters.
Item Description
Syntax message-fast-tx time
no message-fast-tx
Context configure>system>lldp
Description This command configures the duration (in seconds) of the fast transmission period for LLDP
PDUs.
The no form of the command returns the duration to the default duration.
Default 1
Parameters time — Specifies the fast transmission period in seconds.
Values: 1..3600