"FD 100/320Gbps NT and FX NT IHub System
Basics, Management and OAM Guide"
Ethernet Connection Fault Management
Issue: 10 3HH-11982-AAAA-TQZZA 203
8.12.3.5 mip
Table 237 mip command
Table 238 shows the command output fields.
Table 238 Show eth-cfm mip command output fields
Output example:
A:ALA-12# show eth-cfm mip
==========================================================================
CFM SAP MIP Table
==========================================================================
Sap Mip-Enabled Mip Mac Address
--------------------------------------------------------------------------
nt-a:xfp:1:100 yes Not Configured
==========================================================================
==========================================================================
CFM SDP MIP Table
==========================================================================
Sdp Mip-Enabled Mip Mac Address
--------------------------------------------------------------------------
nt-a:xfp:4:20:21 yes Not Configured
==========================================================================
8.12.3.6 Y1731
Table 239 shows the proactive loss session output fields.
Item Description
Syntax mip
Context show>eth-cfm
Description This command displays SAPs/bindings provisioned for allowing the default MIP creation.
Label Description
Sap Sap Id
Sdp Sdp Id
Mip-enabled Mip enabled status
Mip Mac Address Mip Mac address